Fiddlers Green

Downloadable Fun!
It is currently Thu Mar 22, 2018 4:53 pm

All times are UTC - 7 hours

Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Making models larger
PostPosted: Sun May 17, 2009 11:25 am 
FG Tissue Paper

Joined: Sat May 16, 2009 6:57 am
Posts: 3
If a planes scale is 1:144 how do you print it out at a larger scale?

John :?

 Post subject:
PostPosted: Sun May 17, 2009 12:58 pm 
FG Cutter

Joined: Sat Nov 03, 2007 11:41 am
Posts: 60
Location: Middle GA

You don't give much to go on (and some models at 1:144 are still pretty big).

In case you're the "point-in-the-right-direction-and-I'll-figure-it-out" kind of guy, I've recommended in past a PDF reader alternative called "PDF-XChange Viewer". What this provides over acrobat reader is enhanced printing options including user defined scales and large image tiling.

I'm assuming you've got the math down so I'll save you the drawn-out and likely-to-confuse math lesson.

Now this won't improve poor resolution of the source model. if it's tiny at 1:144, then it's probably not very detailed. enlarging it should be easy-peasy, but if it wasn't very detailed you might not be happy with what you get. it's like enlarging a 1 megapixel image -- 3"x5" prints might look just fine, but a poster print is likely to look terrible. Not a lot can be done in that case . . .

Happy Printing!

Dan da Crafty Man <><

 Post subject:
PostPosted: Thu May 21, 2009 2:54 pm 
Paper Model CINC
User avatar

Joined: Thu Oct 21, 2004 9:34 am
Posts: 955
Location: Pensacola
I recommend using a program like Photoshop or GIMP (freeware) to create an enlarged version of the original, then, use the cut, copy and paste functions to move each enlarged part to a new document (properly dimensioned for a printed page--I use 7.56 x 10.5 inches--the same as FG). Then rotate each part to take advantage of the paper's grain. Using programs like these, you also have control over dpi, as well as size.


Currently working on: see avatar

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group